Easy operation –
brilliant results
Users of the SurfaceCleaner-100 do not require special training; however, they should receive a brief introduction to understand how the SurfaceCleaner-100 can be put into operation using the following steps.
Step 1
Turn on the water tap
Step 2
Switch on the main power switch and press the START button
Step 3
Take the dispensing gun and fill the container
Switch on the device. The software changes from standby mode to ready mode.
Diamond technology:
Innovation in every drop
Start SC water production. The device produces the cleaning solution from tap water..
Diamond Power:
Water becomes a cleaning agent
The SC-100 uses patented boron-doped diamond electrodes for the electrochemical activation of water. By generating highly reactive hydroxyl radicals, a powerful cleaning medium is created without the addition of any chemicals.
Descaled tap water is enriched with salt and passed through the electrolysis cell integrated into the SurfaceCleaner-100. Inside the electrolysis cell, SC water is produced – a highly effective cleaning solution with a pH value of 8.5.
The electrolysis cell and the boron-doped diamond electrodes installed within it are supplied with electrical energy (direct current) and are therefore electrochemically activated. This process not only establishes the pH value of 8.5 required for cleaning, but also produces cleaning-supporting oxidizing agents (active chlorine from the salt and active oxygen from the water).
The electrochemical process produces the effective and high-performance SC water just in time. Electrolysis is carried out using boron-doped diamond electrodes. Based on more than 20 years of development and multiple patents, these are by far the most effective electrodes on the market.
For you, this means you are scientifically proven to be in the best hands.
400 x 220 x 550 mm (L/W/H)
SC-100
Softner
320 x 520 x 670 mm (L/W/H)
2 liters of SC water per minute
Dispensing gun
Installation requirements
-
Load-bearing wall (for approx. 25 kg), floor space available nearby
-
2 power outlets nearby (230 VAC)
-
1 water connection 3/4"
-
1 drain (floor drain or sink/siphon at max. 30 cm height)
-
Floor space min. approx. 50 × 50 cm and wall space approx. 50 × 200 cm
Maintenance
The SC-100 should be serviced at least once per year or undergo a safety inspection by a qualified person.
SC water:
Tough on dirt, gentle on the environment
.png)
SC water remains stable for at least 5 weeks and is tested and approved in accordance with EN 1276 and EN 14476.
.png)
Perfect for smooth surfaces such as glass, stainless steel, laminate, natural stone, and plastic.
.png)
Free from harmful chemicals, pH-neutral (8.5) and safe for disposal via the wastewater system.
.png)
Minimal operating costs of less than
€1 per liter – effective cleaning without high costs.
